search
Search in web contents
ELECTROIMANES PARA MANIPULACIÓN DE BOBINAS DE CHAPA

COILS HANDLING

In these electromagnets, it should be note two types:

  • Electromagnets for coils handling on their vertical axis.
  • Electropermanents for coils handling on their horizontal axis

COILS HANDLING ON THEIR VERTICAL AXIS

Used for the rapid movement of coils by their flat surface or vertical axis, they have a large contact surface and may consist of modules of two or three elements.

Specially designed for not to damage the edges of the band, they have a deep magnetic field that enters in the body of the coil. However, this field is of relatively low intensity in order to not produce excessive force on the edge of the band.

For automated installations, flow magnet deviation for electro-permanent is usually used, in which the force is made solely by permanent magnets, thus increasing safety compared to conventional electromagnets.

For non-automated installations either classical electromagnets or commutation electro-permanents are provided. The electromagnets are supplied with an emergency battery system to keep the load lifted in case of a power cut. The second, maintain the increased security of the deviation electro-permanents, the only difference being that the permanently indoors electromagnets are maneuverable.

AII types of magnets, whether they are electromagnets or electro-permanents, are supplied with electrical or electronic control equipment, feed and protection.

COILS HANDLING ON THEIR HORIZONTAL AXIS

These are electromagnets with a powerful magnetic field depth. Their articulated external poles adjust to the curvature of the coil, in this way they can adapt lo different external diameters of the coil.

Their exclusive application is unitary handling rolled sheet coil by its horizontal axis or curved surface.

The main advantages are the large increase in storage capacity, with no need for space between the coils to be handled by other means, as well as the great reduction in time spent in transport and handling, and above all, the disappearance of traces and deformation of the coils caused by the use of mechanical means.

These electromagnets are provided with their corresponding electrical power and control equipment, with the latest protection and security systems. For the correct choice of the electromagnet, FELEMAMG requires the following information:

  • Maximum and minimum external diameter.
  • Internal diameter.
  • Height of the coil
  • Maximum weight of the coil.
  • Overhead crane data (Capacity, height,....)

Contact information

Avda. Agricultura, 15 - 33211- Gijón (Asturias) ESPAÑA
Fax: (+34) 985 324 226